POL BLOCK

POL BLOCK

POL BLOCK

POL BLOCK is an anti-slip joint designed for Ecopal and Ecopal 2.0 corrugated pipes. The item is manufactured in high-density polyethylene, the same material with which Polieco Group pipes are designed.

The corrugated pipe coupling system consists of two circular components connected by transverse components to be positioned within the space between one rib and the next, in the proximity of the corrugated pipe joints. The system is therefore available in different sizes according to the intended diameters.

POL BLOCK was designed as a reinforcement system for the normal corrugated pipe coupling system for non-pressurised sewerage distribution networks. In particular, the anti-slip joint can be installed on construction sites where corrugated pipes are laid with a steep slope and any ground movement may cause pipes to disconnect with a consequent hydraulic leak.

The entire corrugated pipe joint is designed to help workers to install pipes at construction sites: all of the POL BLOCK components fit together without using specific equipment or steel clamps. This system is highly functional, even under difficult installation conditions, where it will be possible to position the different components and then to easily close the joint.

Download the information brochure and the specifications for detailed information on all of the features of POL BLOCK, the anti-slip joint for corrugated pipes manufactured by Polieco.